11
Installation Instructions
Style 3 - Connection to Shutoff Valve
1. Unplug refrigerator or disconnect power.
2. Remove and discard the shipping tape and the black nylon plug from the gray, coiled water tubing
on the rear of the refrigerator.
3. Before attaching copper tubing to refrigerator, flush at least 2 qt (1.9 L) of water through the copper
tubing and into a bucket to get rid of any particles in the water line.
4. Check for leaks around the saddle valve. Do not overtighten clamp or sleeve. This will crush copper
tubing.
5. Push the bulb end of the tubing into the water valve as far as it will go. Thread the provided nut
onto the water valve as shown.
NOTE:
Tighten the nut by hand. Then tighten it with a wrench two more turns. Do not overtighten.
6. Turn shutoff valve ON.
7. Check for leaks. Tighten any nuts or connections (including connections at the valve) that leak.
Plug in Refrigerator
1. Plug into a grounded 3 prong outlet.
A
B
A. Refrigerator water tubing
B. Nut (provided)
C. Bulb
D. Coupling (provided)
E. Ferrule (purchased)
F. Nut (purchased)
G. Household water line
A. Bulb
B. Nut (provided)
Summary of Contents for Designer DDSF136DSS
Page 2: ......
