B. Surface Mount Style (AES-2000S)
The
AES-2000S
comes with an integral steel surface mount chassis. A knockout is provided on the bottom of the chas-
sis as an alternate wire entrance. The four outer holes on the back of the chassis are for mounting the box to the wall.
0.875" Diameter
Knockout
(3) Hinge Holes
Junction Box Holes
Chassis Mounting Holes
Front View of Steel Surface Mount Chassis
12.26"
6.13"
4.5"
9.0"
4.83"
1.5"
1.5"
1.65"
3.0"
6.0"
3.0"
3.0"
(4) 0.26" Diameter
Typical
3.3"
9.66"
0.875" Diameter
Knockout
(2) 0.20" x 0.43"
Slots Typical
(4) 0.16" Diameter
Typical
4.0"
4.0"
Use Sealant
VIKING
©
Hudson, WI
LETTERS
NAMES
CALL/HANG-UP
EZ
TM
HELP
VOLUME
TTY
Hinge
(3) Screws (included) for
mounting the AES-2000 to the
surface mount chassis.
Steel Surface Mount
Chassis (included)
AES-2000
1.
To mount the unit to a wall, unlock the panel using the key provided and swing the front panel open.
2.
Use the junction box holes provided in the back of the enclosure for alignment.
3.
Fasten the enclosure securely to the wall using these four holes.
Important:
If the enclosure is to be mounted outdoors, use an appropriate sealant between the enclosure and the wall.
