Viking 15" (38.1 cm), Use & Installation Manual

Page: 13 / 36

13
30-5/16”
(77.0 cm)
Mounting Surface
(non-face) side
Mounting Surface
(non-face) side
1/4” x 3/8” deep hinge screw clearance hole. Locate and
drill using door hinge hole after the door has been aligned
to the unit and when the wood is positioned on door.
Pre-drilled pilot holes -
10 places
BACK
VIEW
OF
OVER
LAY P
ANEL
TOP
OF
DOOR
1-23/32” (4.4 cm)
min. width to cover
door extrusion
23/32”
(1.8 cm)
TYP
23/32”
(1.8 cm)
TYP
13/16” (2.1 cm)
counterbore
7/16” (1.1 cm)
deep
22-1/2”
(57.2 cm)
TYP
15-5/32”
(38.5 cm)
TYP
7-13/16”
(19.8 cm)
TYP
15/32”
(1.2 cm)
15/32”
(1.2 cm)
Diameter Hole
7-13/16” (19.8 cm)
15-5/8” (39.7 cm) TYP
23-7/16” (59.5 cm)
1/4” x 3/8” deep hinge screw clearance hole. Locate and drill
using door hinge hole after the door has been aligned to the
unit and when the wood is positioned on door.
Min. 5/8” (1.7 cm)
Max. 3/4” (1.9 cm)
3-7/32”
(8.1cm)
Mounting Surface
(non-face) side
FOR 3-1/2” TOE KICK
(COVERS THE ENTIRE DOOR EXTRUSION - RIGHT HINGE)
Selecting and Preparing the Wood Frame - 24”W. DFUW Model