background image

MICROFAST

®

 QUICK 

RESPONSE FUSIBLE 

ELEMENT PENDENT 

SPRINKLER VK353 (K8.0)

TECHNICAL DATA

Page 4 of 6

Form No. F_071814   19.02.21   Rev 19.1

The Viking Corporation, 210 N Industrial Park Drive, Hastings MI 49058

Telephone: 269-945-9501  Technical Services: 877-384-5464  Fax: 269-818-1680  Email: [email protected]

Visit the Viking website for the latest edition of this technical data page www.vikinggroupinc.com.

Approval Chart 1 (UL)

The Viking Microfast

®

 Quick Response 

Pendent Sprinkler VK353

 

Maximum 175 PSI (12 Bar) WWP

Base 

Part 

Number

1

SIN

Sprinkler 

Style

Thread Size

Nominal K-Factor Overall Length

Listings and Approvals

(Refer also to Design Criteria.)

NPT

BSP

U.S.

metric

2

Inches

mm

cULus

4

VdS

LPCB

              

18274

VK353

Pendent

3/4”

20 mm

8.0

115.2

2-5/16

59

A1X, B1Y

--

--

--

18273

6

VK353

Pendent

1/2”

15 mm

8.0

115.2

2-5/16

59

A1X, B1Y

--

--

--

NOTICE - Product Below - Limited Availability (Contact Local Viking Office)

13975

VK353

Pendent

3/4”

20 mm

8.0

115.2

2-5/16

59

A1X, B1Y

--

--

--

13967

6

VK353

Pendent

1/2”

15 mm

8.0

115.2

2-5/16

59

A1X, B1Y

--

--

--

Approved Temperature Ratings

A - 165 °F (74 °C), 205 °F (96 °C), and 280 °F 

(138 °C)

B - 165 °F (74 °C) and 205 °F (96 °C)

Approved Finishes

1 - Brass, Chrome, White Polyester

5

Black Polyester

5

, and Black 

PTFE

Approved Escutcheons

X - Standard surface-mounted escutcheon

Y - Standard surface-mounted escutcheon or recessed with 

the Viking Micromatic® Model E-1, E-2, or E-3 Recessed 

Escutcheon

Footnotes

1

 Base part number shown. For complete part number, refer to Viking’s current price schedule.

2

 Metric K-factor measurement shown is when pressure is measured in Bar. When pressure is measured in kPa, divide the metric K-factor shown by 

10.0.

3

 This table shows the listings and approvals available at the time of printing. Other approvals may be in process.

4

 Listed by Underwriters Laboratories Inc. for use in the U.S. and Canada.

5

 Other colors are available on request with the same Listings and Approvals as the standard colors.

6

 The 1/2” NPT Large Orifice Sprinkler is Listed and Approved for retrofit only.

DESIGN CRITERIA - UL

 

(Also refer to Approval Chart 1 above.)

cULus Listing Requirements:

 

Quick Response Fusible Element Pendent Sprinkler VK353 is cULus Listed as indicated in the Approval Chart for installation in accordance with the 

latest edition of NFPA 13 for standard spray sprinklers.

• 

Designed for use in Light and Ordinary Hazard occupancies.

• 

The sprinkler installation rules contained in NFPA 13 for standard spray pendent sprinklers must be followed.

IMPORTANT: Always refer to Bulletin Form No. F_091699 - Care and Handling of Sprinklers. Also refer to Form No. F_080614 

for general care, installation, and maintenance information. Viking sprinklers are to be installed in accordance with the latest 

edition of Viking technical data, the appropriate standards of NFPA, LPCB, APSAD, VdS or other similar organizations, and 

also with the provisions of governmental codes, ordinances, and standards, whenever applicable. 

Summary of Contents for 139676












Reviews: