VOLCANO Jet (Heritage & Tradition
only)
The Turbo jet is located on the filter cavity
wall is the Turbo jet. This jet is a combina-
tion valve and high capacity jet. To turn
the Turbo jet on, simply turn the face count-
er-clockwise to the first stop position. To turn
the Turbo jet off, turn the face clockwise to
bring the main jets back to full power.*
The Volcano Jet operates on a valve
located in the middle of the lounger. Turn
the valve to activate the jet. Note: this valve
directs one of the pumps and will effect the flow
this pump used to power other jets in the spa.
* Due to the substantial amount of water pressure when the Turbo Jet is
operating, you must turn the pump to the off or low speed cycle position
before attempting to rotate the jet face.
AIR CONTROLS
Air controls are adjusted by rotating the topside dial. These controls
serve to regulate the amount of air mixed with water when the whirlpool
or hydrotherapy jets are operating in the
high pump mode
.
13
All other models (See illus-
tration on page 11)
