FILTER CLEANING
(All Spas except Viking 1P, Viking 2P, Viking 3)
Remove filter face cover by pulling straight up and
slightly toward the spa on front plate/face cover. (As
shown below.) Remove access basket and unscrew
filter cartridge(s) from housing. To reinstall weir door
assembly, door must be placed through throat of
skimmer prior to slid-ing assembly into place. Refer
to filter cleaning procedure for Viking IP, Viking 2P &
Viking 3 on previous page.
NOTE:
Spas with this filter uti-lize 50 sq. ft. cartridge filters.
FILTER CLEANING
(Viking 1P, Viking 2P & Viking 3)
Your filter should be replaced once a year. When filters
are removed from the spa, make sure that no objects fall
into the filter cavity. They can cause obstruction to water
movement. Remove filter cartridges as shown in figures
below.
The filter must be cleaned every month, more often with
heavy use, to get rid of objects and particles that are
lodged in the filter pleats. Using a garden hose with a
pressurized nozzle, push water from the inside to the
outside of the filter pleats forcing all trapped particles out.
If the filter is too dirty to be cleaned as described above,
obtain filter cleaner material from your Viking Spa Retailer.
Soak the filter overnight; then hose it down.
SPA COVER MAINTENANCE
Please refer to the cover manufacturers care and
maintenance form included in the box the cover came in.
For proper installation of the cover the tiedown hardware
must be installed.
SPA CABINET MAINTENANCE
Your Viking spa cabinet is designed to be maintenance
free. However, if dirt or grime should appear simply use a
mild soap solution and clean with a rag.
A. Locate skimmer.
C. Remove basket.
B. Pull weir door open.
B. Remove front plate.
D. Clean per instructions.
A. Locate skimmer.
C. Remove basket & filters.
D. Remove the
two separate filters
and follow cleaning
instructions above.
19
MAINTENANCE
