17
Final Preparation
1.
Some stainless steel parts may have a
plastic protective wrap, which must be
peeled off. All stainless steel body parts
should be wiped with hot soapy water
and with liquid cleaner designed for this
material. If build-up occurs, do not use
steel wool, abrasive cloths, cleaners or
powders! If it is necessary to scrape
stainless steel to remove encrusted
materials, soak with hot, wet cloths to
loosen the material, then use a wood or
nylon scraper.
DO NOT
use a metal knife,
spatula, or any other metal tool to scrape
stainless steel! Scratches are almost
impossible to remove.
2.
The interior of the oven should be washed
thoroughly with hot, soapy water to
remove film residues and installation
debris before being used for food
preparation, then rinsed and wiped dry.
Solutions stronger than soapy water are
rarely needed.
16
1
2
Replace door.
Open door completely. Reinstall hinge trim plates.
Note:
Screw holes may need to be re-aligned.
3
4
Take out pins.
Note:
To adjust door turn adjustment screw
clockwise (up) or counterclockwise (down).
Close door.
Door Replacement & Adjustment
All manuals and user guides at all-guides.com
