4
C. Using the K-1200 with a C-1000B
In some instances it may be a concern that the Door Strike relay is outside the door. In this situation, a second
controller such as a
C-1000B
can be used. Be sure to disable the door strike code for the
K-1200
(see
Programming
section
H
).
Notes:
1. The
C-1000B
must be in the “Analog Station Mode” (refer to the
C-1000B
Product Manual).
2. The
K-1200
keyless entry codes can not be used in this application.
3. The
K-1200
will hang up during doorstrike activation.
DOOR ENTRY / CCTV VIDEO
CONTROLLER
VIKING
©
MODEL C-1000B
PWR 13.8 V
A
C
DOOR
STRIKE 1
DOOR
STRIKE 2
DOORBOX 2
DOORBOX
PWR OUTPUT
DOORBOX 1
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18 19
EARTH
GND
PHONE LINE
INPUT
LINE OUT
TO PHONES
KEYLESS CONTACT
CLOSURE INPUT
VIKING
ELECTRONICS
HUDSON, WI 54016
EARTH
GND
C.O. LINE
INPUT
OUT TO
PHONES
KEYLESS
C.C. INPUT
DOOR
BOX 1
DOORBOX
13VAC PWR
DOOR
BOX 2
N.O. COM N.C.
DOOR STRIKE 1
SIG GND
VIDEO 1 IN
SIG GND
VIDEO 2 IN
SIG GND
VIDEO OUT
N.O. COM N.C.
DOOR STRIKE 2
TALK BATTERY
OFF ON
C
LED1
C
LED2
C
LED3
ON
1 2 3
COM N.O. N.C. - - - - AUX.
CONTACT
OUTPUT
13.8V AC
Adapter
(included)
Talk Battery Switch
OFF
ON
CO line or Analog
PABX/KSU Station
Earth
Ground
5A@30V DC/
250V AC maximum
Red
Green
ON
1 2 3
DIP Switches
Model K-1200,
shown in optional
VE-5x10-SS Stainless Steel
Surface Mount Box (not included)
ON
OFF
Model C-1000B
(not included)
Doorstrike / Magnetic Lock
120V AC
120V AC
120V AC
D. Using the K-1200 with a C-3000
For a “No CO” installation, a Viking
C-3000
No CO controller can be used with the
K-1200
. Note, the
K-1200
will
need to be programmed on a separate CO line or use the Viking
DLE-200B
. The door strike can be controlled by
the
K-1200
or the internal relay on the
C-3000
, just be sure to disable the door strike feature in the other unit. The
keyless entry feature of the
C-3000
can not be used. If not using keyless entry codes, use the
C-3000
to control
the doorstrike. If using keyless entry codes (up to 50), use the
K-1200
to control the doorstrike. The
K-1200
speed
dial position should be programmed with the
C-3000
line selection command “1” to “12”. (Refer to the
C-3000
Technical Practice for more details, DOD# 162).
Model K-1200
shown in optional VE-5x10-SS Stainless
Steel Surface Mount Box (not included)
120V AC
VIKING
©
MODEL C-3000
VIKING
ELECTRONICS
HUDSON, WI 54016
12 UNIT APARTMENT
ENTRY CONTROLLER MODULE
POWER
13.8 VAC
3 4 5 6 7
1 2
DOOR
STRIKE
1
DOOR
STRIKE
2
DIP
SWITCH
1 2 3
RJ21X
12 APARTMENT LINES IN/OUT
8
ENTRY
PHONE 1
MULTI-MODULE
INTERCONNECTS
POSTAL
LOCK
INPUT
ENTRY
PHONE 2
OUT IN
PWR
IN
USE
PROGRAM PHONE
O
N
O
F
F
Red
Red
Green
Green
Model C-3000
(not included)
120V AC
120V AC
Model K-1200
shown in optional VE-5x10-SS Stainless
Steel Surface Mount Box (not included)
Notes:
1. In this application, the
C-3000
keyless entry feature is not available. Use the keyless entry
feature of the
K-1200
and wire both door strike relays in parallel.
2. The
K-1200
will hang up during the doorstrike activation.
