background image

PRODUCT MANUAL

Designed, Manufactured and Supported in the USA

S E C U R I T Y   &   C O M M U N I C A T I O N   S O L U T I O N S

Features

The

K-1200

Entry Phone is a two-way, handsfree

telephone with 12 buttons for calling individual
residences in an apartment building. The rugged
stainless steel faceplate has a printed directory
housed in a waterproof, scratch-resistant lens.
Each button is beside the tenants name in the
directory so there are no confusing codes to deal
with. Calling a particular tenant is as easy as
pressing a single button. The 

K-1200

has a built in

speed dialer that can handle up to 12 primary
phone numbers, each with 22 digits. If there is no
answer at the first number, a second number can
be called automatically. Once the tenant answers
their phone, a single touch tone command can
activate the door strike relay. For “no phone line”
applications, the 

K-1200

is compatible with the 

C-

3000

no CO (phone line) controller. 

The 

K-1200-EWP

shares all of the features of the

K-1200

in addition to Enhanced Weather

Protection (EWP) for outdoor installations where
the unit is exposed to precipitation or
condensation.  EWP products feature foam rubber
gaskets and boots, sealed connections, gel-filled

•  

Vandal Resistant Features:

14 gauge louvered 316

stainless steel faceplate with permanent laser etched
graphics, heavy duty metal keypad and T-10 Torx
Security mounting screws.

•  

Weather Resistant Features:

Marine grade 316

stainless steel faceplate and screws. Internally sealed
keypad. Mylar speaker. Self-draining mic mount.
Faceplate, keypad, mic and speaker gaskets. 

•  

K-1200-EWP

is designed to meet IP66 Ingress

Protection Rating (see 

DOD# 859

for more info)

•  Operates on 12 to 24 volts AC/DC
•  12 speed dial buttons (22 digits each)
•  12 alternate number positions (22 digits each)
•  One button operation (no call button)
•  Hang up on CPC, busy, silence, time-out or dial tone 
•  Touch tone restriction from microphone
•  Integral relays for camera control and door strike
•  Works with 

C-1000B

for increased security

•  Works with 

C-3000

for “No CO” (phone line) operation

•  50 keyless entry codes
•  See model 

K-1205

for integral camera

•  Postal lock input
•  Optional 

VE-5x10

surface mount box (

DOD# 424

)

•  Small apartment buildings
•  Professional buildings
•  Gated communities

Power: 

12 to 24 Volts AC or DC, 12VDC adapter provided

Note: 

To assure operation during a power outage, a UPS

should be used.

Dimensions: 

127mm x 254mm x 63.5mm (5" x 10" x 2.5")

Shipping weight: 

2.2 kg (4.8 lbs.)

Standard K-1200 Environment: 

-34° C to 65° C (-30° F

to 150° F) with 5% to 95% non-condensing humidity

K-1200-EWP Environment:

-34° C to 65° C (-30° F to

150° F) with up to 100% condensing humidity

Relay Contact Rating: 

Door Strike:  5A @ 30VDC/250VAC maximum
Camera:  0.5A @ 125 VAC, 1.0A @ 30VDC

Connections: 

(8) gel-filled butt connectors (3M Scotchlok

UR2)

K-1200/EWP

Multi-Button

Handsfree Entry Phone

February 9, 2016

Applications

Specifications

www.vikingelectronics.com

Information: (715) 386-8861

VIKING

butt connectors, as well as urethane or thermal
plastic potted circuit boards with internally sealed,
field-adjustable trim pots and DIP switches for easy
on-site programming.

(shown in optional 

VE-5x10-SS, not included)

12 Button Apartment Entry Phone with

Built-In Door Strike Relay

Summary of Contents for K-1200/EWP









Reviews: