VIKING TECHNICAL SUPPORT 1.800.908.0884
1 8
ELECTRICAL INSTALLATION
SOLAR POWER CONNECTIONS
STEP 1
Connect the 12V Solar Panel
to the terminals labeled “PANEL”.
!
Caution: Ensure correct polarity
!
Power Saving Tip
The Solar VFlex Control Board shuts down power at
the “Aux. Pwr” Terminal when the board is in sleep
mode.
To save energy, get the power for your non-essential
devices (such as photo beams) from this terminal.
STEP 2
Connect the 12V Battery to
the terminals labeled “Battery”.
!
Caution: Ensure correct polarity
STEP 3
Turn the “PANEL” switch to
the “RESET” position.
STEP 5
Connect the Power Harness
and verify the “POWER” LED
5a
is illuminated solid.
STEP 4
Turn the “POWER” switch
to the “RESET” position.
!
IMPORTANT:
The number of cycles achieved daily is dependent on many factors,
including local solar radiation data and power consumption of the motor and
accessories. It is very important that you consider this when using solar power.
4
5
5a
1
2
3
