MODEL VG6046
6
A2
A3
2.
Measure *70 5/8" and 71 9/16" from the
floor or curb of base. Mark these locations.
These measurements will be the center of
each hole in your wall mount bracket
assembly plate (#2).
3. Place the structural rail (#4) into the cabin
opening. Make sure that the wall mount
brackets (#2) are assembled on the rail
before doing this. Make sure the structural
rail is level. Mark the location of the wall
mount brackets (#2) on the wall.
Note: If you have chosen to install this
unit into a 59" opening you will have to
cut the structural rail (#4) in order for it
to fit.
71 9/16"
The dimension supplied
is measured at the center
of the wall mount bracket.
4
2
70 5/8"
71 9/16"
70 5/8"
71 9/16"
70 5/8"