18
V1.0
Vig770S Motherboard Manual
Chapter 3
– System Board Options
3.1 Upgrades
The Vig770s motherboard is supports Intel® Core i3, i5, i7 and Pentium processors in the
LGA1151 socket. RAM support up to a maximum of 64GB using DDR4 2400/2133MHz Non
ECC Un-buffered DIMMs.
WARNING!
Unplug the system before carrying out the procedures described in this chapter.
Failure to disconnect power before you open the system can result in personal
injury or equipment damage. Hazardous voltage, current, and energy levels are
present in this product. Power switch terminals can have hazardous Voltages
present even when the power switch is off.
The procedures assume familiarity with the general terminology associated with
personal computers and with the safety practices and regulatory compliance
required for using and modifying electronic equipment.
Do not operate the system with the cover removed. Always replace the cover
before turning on the system.
As the colours of the wires in the mains, lead of this computer may not correspond with the
coloured markings identifying the terminals in your plug precede as follows:
The green-and-yellow wire must connect
to the
terminal.
in the plug, which is marked by the
letter
E
or by the safety Earth symbol
Q
or coloured green or
green- and-yellow
.
The wire, which is coloured blue, connects to the terminal, which is marked with the letter
N
or coloured
black
.
The wire, which is coloured brown, connects to the terminal, which is marked with the letter
L
or coloured
red
.
CAUTION!
The
Viglen
Vig770S
motherboard
and
associated components are sensitive electronic
devices. A small static shock from your body can
cause expensive damage to your equipment.