manualshive.com logo in svg

Viglen Vig770S, Manual, Page: 12 / 59

Share
Download
Viglen Vig770S Manual Download Page 12

12 
V1.0 

Vig770S Motherboard Manual 

 

2.2.1 

(1)  

CPU and chassis fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN). 

Connect the fan cables to the fan connectors on the motherboard, ensuring that the 
black wire of each cable matches the ground pin of the connector. 

 

NOTE: Do not forget to connect the fan cables to the fan connectors. Insufficient airflow inside 
the system may damage the motherboard components. These are  not jumpers! Do not place 
jumper caps on the fan connectors! The CPU_FAN connector supports a CPU fan of maximum 
1A (12 W) fan power. 

 

 

 

 

 

 

2.2.2  (2)  ATX power connectors (24-pin EATXPWR, 4-pin ATX12V) 

 

Correctly orient the ATX power supply plugs into these connectors and push down 
firmly until the connectors completely fit. 

 

NOTE: For a fully configured system, we recommend that you use a power supply unit (PSU) that 
complies with ATX 12 V Specification

 

2.0 (or later version) and provides a minimum power of 350 W.

 

 
 

2.2.3  (3) M.2 socket 3 

l These sockets allow you to install an M.2 (NGFF) SSD module. 
 

2.2.4 

(

4) Intel® LGA1151 CPU socket 

Install Intel® LGA1151 CPU into this surface mount LGA1151 socket, which is designed 
for sixth 

Generation Intel® Core™ i7 / i5 / i3, Pentium®, and Celeron® processors. 

 

2.2.5  (5) DDR4 DIMM slots 

This motherboard comes with four Double Data Rate 4 (DDR4) Dual Inline Memory 
Module (DIMM) sockets. A DDR4 module is notched different from a DDR, DDR2, 
or DDR3 module. Install 2 GB, 4 GB, 8 GB, and 16 GB un-buffered non-ECC DDR4 
DIMMs into these DIMM sockets. 
 

2.2.6  (6)

 

Intel® B250 Serial ATA .0 GB/s connectors (7-pin SATA6G 1~6).

 

These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0 
Gb/s signal cables 
 

2.2.7  (7) USB 3.0 connector (20-1 pin USB3_12 USB3 910) 

Connect a USB 3.0 module to any of these connectors for additional USB 3.0 front 
or  rear  panel  ports.  These  connectors  comply  with  USB  3.0  specifications  and 
provide faster data transfer speeds of up to 5Gbps, faster charging time for USB-
chargeable  devices,  optimized  power  efficiency,  and  backward  compatibility  with 
USB 2.0. 
 

2.2.8  (8)  System panel connector (10-1 pin Front Panel) 

This connector supports several chassis-mounted functions. 
 
 

2.2.9  (9) Speaker connector (4-1 pin SPEAKER) 

The 4-pin connector is for the chassis-mounted system-warning speaker. The speaker 
allows you to hear system warnings. 
 

Summary of Contents for Vig770S




























































Reviews:

No comments