V1.0
VIG610M Motherboard Manual
31
4. Visually inspect if the CPU is seated well into the socket. If not, take out the CPU
with pure vertical motion and reinstall. Cover the load plate onto the package.
Figure 23:
Cover the load plate
5. Press down the load lever lightly onto the load plate, and then secure the lever
with the hook under retention tab. Align the holes on the motherboard with the
heatsink. Push down the cooler until its four clips get wedged into the holes of the
motherboard.
Figure 24:
Install heatsink
6. Press the four hooks down to fasten the cooler. Then rotate the locking switch
(refer to the correct direction marked on it) to lock the hooks. Turn over the
motherboard to confirm that the clip-ends are correctly inserted.
Figure 25:
Install heatsink 2
