Viglen VIG610M Manual Download Page 16

Page: 16 / 75

V1.0

VIG610M Motherboard Manual

L – Serial ATA II Connectors

Can connect up to 4 SATA devices (Hard Disk Drive, CD-ROM)

M – Front Panel Connector 2

Controls the Speaker and Power LED

N – USB header

Allows up to 2 USB devices to be connected to each USB header

O – Clear CMOS jumper

This allows you to clear the CMOS of the Motherboard when moving the jumper from
pins 1-2 to 2-3.

P – Floppy Connector

This connector allows you to connect a floppy drive to the chassis.

Q – Serial Port Connector

This connector allows you to connect a serial device to the chassis

R – Front Panel Audio Connector

This header supports HD Audio which allows the Motherboard to support front panel
Audio.

S – CD-In Connector

This connector is provided for external audio input.

T– PCI Slot 32bit

The PCI slots support LAN cards, USB cards and other add-on cards that comply
with PCI specifications.

U – Chassis Intrusion

Notifies before entering OS that the Chassis panel may have been tampered with.

K and L – USB header

Allows up to 2 USB devices to be connected to each USB header

V – PCI Express x1 and x16 Slot

The PCI Express x1 supports up to 250 MB/s transfer rate. The PCI Express x16
supports up to 4.0 GB/s transfer rate.

V- Rear I/O Connector

Consists of multiple components to connect i.e. VGA, PS/2 Keyboard and Mouse.

Summary of Contents for VIG610M












































































Search results

Summary of Contents for VIG610M

Reviews:

Related manuals for VIG610M

Brands by name

Popular brands

Viglen VIG610M, Manual

Search results

Summary of Contents for VIG610M

Reviews:

Related manuals for VIG610M

Brands by name

Popular brands