manualshive.com logo in svg

Viglen PMPGF001, Quick Start Manual, Page: 21 / 21

Share
Download
Viglen PMPGF001 Quick Start Manual Download Page 21

BIOS Initial Release. 

 
CO96510J.86A.4713.2006.0828.1752 

 
Driver’s initial release 

 

Windows 98SE, Windows ME, Windows NT4 Drivers are not supported 
 
Windows 2000 & Windows XP Drivers

 

Audio: Sigmatel STAC9227  

5.10.5143_v1_ 

23.5MB 

27 July 2006 

INF: Intel® Chipset Software Installation Utility   8.0.1002 PC 

1.07MB 

24 May 2006 

LAN: Intel® PRO Network Connections  

11.1 

36.3MB 

19 July 2006 

Management Engine AFSC 

2.0.18.118 

2.06 

15 August 2006 

Graphics: Intel Graphics 

14.21.1.4642 

25.3MB 

25 July 2006 

Intel(R) Active Management Technology-Serial 
Over LAN  (iAMT SOL) 

5.1.2600.9403 

2.0MB 

6 June 2006 

RAID Intel Storage Program 

6.10.1002 

 16.8MB 

30 August 2006 

RAID Storage Image + F6 driver disk 

6.1.0.1002 

318KB 

30 August 2006 

Trusted Platform Module (TPM) 

1.00.17 

55.7MB 

26 May 2006 

 

Windows XP Professional x64 Edition Drivers 

Audio: Sigmatel STAC9227  

5.10.5143_v1 

23.5MB 

27 July 2006 

INF: Intel® Chipset Software Installation Utility   8.0.1002 PC 

1.07MB 

24 May 2006 

LAN: Intel® PRO Network Connections  

11.1 

36.3MB 

19 July 2006 

Management Engine AFSC 

2.0.18.118 

2.06 

15 August 2006 

Graphics: Intel Graphics 

14.21.1.4642 

11.1MB 

25 July 2006 

Intel(R) Active Management Technology-Serial 
Over LAN  (iAMT SOL) 

5.1.2600.9403 

2.0MB 

6 June 2006 

RAID Intel Storage Program 

6.10.1002 

 16.8MB 

30 August 2006 

RAID Storage Image + F6 driver disk 

6.1.0.1002 

411KB 

30 August 2006 

Trusted Platform Module (TPM) 

1.50.03 

47.1MB 

15 February 2006 

 

Other Drivers and Patches 

 

Patch-USBBIOSx (Registry Patch for Windows 
XP Pro & Windows Home for wake-up under 
S3 via USB mouse/Keyboard) 

- 

260 KB 

06 Sept 2006 

DOS CDROM Support Driver Instruction 
(SBIDE.SYS) 

- 

614 KB 

15 April 1997 

 

Note:

 

The Trusted Platform Module (TPM) is 

disabled

 by Default in BIOS when system 

shipped to end users from factory. This is to insure that end user of the system initializes the 
TPM and configures all security passwords. End user will also need to install the Trusted 
Platform module software (TPM_ST_Micro). This can be found under C:\Utils\Onboard 
directory of the system hard disk drive or from Driver CD or Viglen FTP site. 

 

Note:

 All the above drivers are PC99 certified. 

 

Page - 21 - of 21 

Summary of Contents for PMPGF001






















Reviews:

No comments