Viglen Dossier LT, User Manual, Page: 109 / 186

Drivers & Utilities
Windows XP 4 - 13
4
Hot-Key (WinXP)
1. Click Start (menu) > Run
...
2. Navigate ( Browse.. ) to D:\Drivers\Quick-
key\CNK001.exe and click OK .
3. Choose the language you prefer, and click OK .
4. Click Next .
5. Click Finish to restart your computer.
TouchPad (WinXP)
1. Click Start (menu) > Run
...
2. Navigate ( Browse... ) to
D:\Drivers\Touchpad\Win2K_XP\Setup.exe
and click OK .
3. Click Next > Next > Next .
4. Click Finish to restart your computer.
5. You may then configure your TouchPad as
outlined in “Configuring the TouchPad and
Buttons” on page 2 - 20 .
PC Card/PCMCIA (WinXP)
1. If you can see the My Computer icon on your
desktop (if you cannot see the My Computer
icon go to step 2 ) click on it once to select it,
then right-click it to make the sub-menu appear
and scroll down to Properties and click on it
(go to step 3 ).
2. If you cannot see the My Computer icon click
Start (menu), then point to (but don’t click just
highlight it) My Computer. Right-click it to
make the sub-menu appear and scroll down to
Properties and click on it (go to step 3 ).
3. Click the Hardware (tab), then click Device
Manager (button).
4. Click “+” next to PCMCIA adapters (if its
sub-items are not shown).
5. If you see Texas Instruments PCI-1410
CardBus Contoller DO NOT install the driver
as it is not required.
OR
If you see Generic CardBus Controller then
follow these steps:
6. Double-click Generic Cardbus Controller
and click Driver (tab).
7. Click Update Driver (button).
8. When the Hardware Update Wizard appears,
click “Install from a list or specific location
(Advanced)” then click Next .
9. Select “Search for the best driver in these
locations.” and select ONLY “Include this
location in the search:” .