3/6
6
2
4
5
1
3
5.
Operation Controls and Functions
5.1
Front Panel
AUTO IN 1 IN 2 IN 3 IN 4
AUTO 2.0
5.1 7.1
eARC
AUTO
NPUT
EDID
eARC ON/OFF
No.
Name
Function Description
1
AUTO LED
When the auto-switching mode for the input source is
enabled, the AUTO LED is on.
2
IN 1/2/3/4 LED
When the INPUT 1/2/3/4 port is connected to the
source signal, the corresponding IN 1/2/3/4 LED is
on.
3
AUTO/INPUT
button
Press this button to switch the input source's auto/manual
switching mode. When you hold this button for 2 seconds,
the device switches to the auto-switching mode, and the
AUTO LED is on. Press and hold this button for 2
seconds again, the device switches to the manual switching
mode, then you can tap this button 1/2/3/4 times to select
the input source for the INPUT 1/2/3/4 port, and the
corresponding IN 1/2/3/4 LED will be on.
Note:
The device can detect signal source automatic lathe
lly in auto-switching mode. When one or several input
ports are connected to source devices, the output port will
output the signal from the last connected input source.
4
EDID button and
status LED
Press the button to select EDID mode: AUTO/2.0/5.1/7.1
(AUTO means using TV EDID), and the corresponding
LED will be on.
5
eARC button
and LED
Press the button to turn on/off ARC/eARC function. The
eARC LED will be on when you turn on the ARC/eARC
function.
6
IR
IR receiver window. It only receives IR remote signal from
this product.
