31/29
Notes:
(1) Currently only Mode 1 is available, Mode 2 and Mode 3 will be ready in
the short future.
(2) For the default IP mode of the Control LAN port of the Controller Box is
DHCP, the PC also needs to be set to “Obtain an IP address automatically”
mode, and an optional DHCP server (e.g., network router) is recommended
in the system.
(3) If there is no DHCP server in the system, 192.168.0.225 will be used as
the IP address of the Control LAN port. You need to set the IP address of
the PC to be in the same network segment. For example, set the PC’s IP
address as 192.168.0.88.
(4) You can access the Web GUI by inputting the URL
"http://controller.local" or the Control LAN port IP address 192.168.0.225
(in case of no optional Router) on your computer's browser.
(5) No need to care about settings of the Video LAN port of the Controller
Box in Mode 1 and Mode 2, as they are managed by the Controller
automatically.
(6) When the Network Switch does not support PoE, the Encoder, Decoder,
and Controller Box should be powered by a DC power adapter.
