16/29
■
Decoders Page
①
ID:
The ID of the current device. (Note: ID is not duplicated.)
②
Name:
The name of the current device.
③
MAC Address:
The MAC Address of the current device.
④
IP Address:
The IP Address of the current device.
⑤
Firmware:
The Firmware version No. of the current device.
⑥
Status:
The status (online or offline) of the current device.
⑦
Source:
The signal source (Encoder) of the current device.
⑧
Display Mode:
The display mode of the current device.
⑨
Scaler Resolution:
The resolution of the current device.
⑩
Function:
The mode (Matrix/Video Wall/Multiview) of the current device.
CEC Command:
The CEC Command of the current device.
Operating Instructions:
(1)
Click “Refresh” to refresh the data of the current Decoders.
(2)
Click the drop-down list of sources to select the current Decoder’s
signal source.
(3)
Click the drop-down list of Display Mode to select the current Decoder’s
display mode.
(4)
Click the drop-down list of Scaler Resolution to select the current
Decoder’s resolution.
(5)
Click the drop-down list of Functions to select the current Decoder’s mode.
(6)
Click “Command” to set the CEC command for the Decoder.
(7)
Click the icon on the left of the ID to check detailed tail information
