Provides an uncompressed digital connection that carries both video and
audio data by way of an integrated mini-plug cable. Since HDMI technology is
based on Digital Visual Interface (DVI), the jack on the back of your
MONITOR is also compatible with DVI devices. HDMI Input Lets you connect
a device, such as a digital cable box, with an HDMI output.
(4) USB:Used to connect the computer's USB port,WIN7 / 8 system is free
to install the driver,plug and play.Can support up to 10-point touch.
WINXP/LINUX/Android OS After the need to install the corresponding driver
before you can use the touch device.
(5) Audio In:Use to obtain sound when a PC is connected to the VGA/DVI
jack. Use a 3.5 mm stereo mini pin cable (sometimes referred to as 1/8
”
stereo mini pin) to connect a PC to your MONITOR.
Connecting the Monitor
When choosing your work-space, select a sturdy, level surface. Also, make
sure you can easily access the back of the monitor. Easy access helps
ensure a smooth setup of the monitor.
Note: Before setting up your monitor, refer to the Important Safety Information
section at the beginning of this document.
1.Turn off your device.You should always turn off the device Before
connecting or disconnecting any device.
2. Connect one end of the VGA cable to the VGA connector on the monitor.
Connect the other end to your application’s VGA connector
3. Plug the monitor’s DC into the power supply.
Basic OSD setup
(a).press MENU button to access Main MENU interface
(b).press + or – to select the desired sub-menu interface and press MENU
again to view the sub-menu (total of 5 sub-menus)
(c). press + or – to select the desired feature & press MENU again to view
the corresponding setting
(d) press + or – to adjust the parameter value of the setting
(e) press SOURCE to exit the setting and return to the previous interface
Main Menu
1.Press the MENU button to view the main
Menu interface.
2.press +(up) or – (down) to select the
desired sub-menu interface and press
MENU button to view the selected sub-
menu.
3. To exit from the Main menu
interface,either press the SELECT button
or press +(up) or – (down) to select Exit,
then press the MENU button
Color
1.From the color setting sub-menu interface,
press +(up) or – (down) to select the desired
feature and press MENU button to view the
selected feature.
2. press +(up) or – (down) to adjust the settings
of the selected feature.
3.CONTRAST
、
BRIGHTNESS
Selecting the Contrast option increases (+) or
decreases (-) the strength (lightness or
dimness) of the image. Adjust the contrast
using the -/left arrow and +/right arrow buttons,
and press MENU to confirm the new setting.
4.Contrast and brightness: 0-100.
Color adjust : Red. Green. Blue
Color temp: 9300. 6500. 5800. S-RGB. USER
5.
Press the
“Source”
button
to exit
5
6
Summary of Contents for DS104PCT
Page 1: ......
