• Consult a construction professional before attempting to hang the unit on
the wall.
To avoid the risk of glass breakage which may result in minor or
moderate
injury:
• Handle the monitor with care to avoid breaking the touch screen sensor.
The display contains glass parts. Dropping the display may cause the glass
parts to break.
• Do not place foreign objects on the monitor.
Important
Notes:
•Plug power cord into appropriate power source & a grounded receptacle.
•When unplugging power supply cord, pull on plug not cord.
•Do not connect or disconnect this product during an electrical storm.
•Install the display in a well-ventilated area. Always maintain adequate
ventilation to protect the display from overheating and to ensure reliable
and continued operation.
•Do not expose this display to heat. Passive heat may cause damage to the
case and other parts.
•Do not install this display in areas where extreme vibrations may be
generated.For example, nearby manufacturing equipment may produce
strong vibrations. The vibrations may cause the display to exhibit picture
discoloration or poor video quality.
•Product weight varies from 10 to 24 pounds depending on the packaging,
use caution when lifting.
• Ensure that metal does not contact the touch screen.
To avoid ergonomic concerns:
Do not install the monitor in a manner or location with awkward
accessibility.Extended use may result in muscle, tendon, or fixed posture
strains. It is recommended you take periodic breaks from continuous use.
CAUTION
：
To avoid the risk of electric shock which may result in
minor or moderate
injury:
Liquid is spilled into the product or the product is exposed to rain or water.
The product does not operate properly when operating instructions are
followed.
•The product has been dropped or the case has been damaged.
•The product shows a distinct change in performance, indicating a need for
service.
Care and Cleaning
CAUTION:
Turn off your MONITOR before cleaning.
You can clean the MONITOR as required, using a soft lint-free cloth. Be sure
to occasionally dust the ventilation slots in the cabinet to help assure
adequate ventilation.
The MONITOR’s screen may be cleaned with a soft, lint-free cloth as well.
Take care not to scratch or mar the screen. If necessary, you may use a
cloth dampened with warm water. While cleaning do not spray liquid directly
on the screen, or allow liquid to run down the screen and inside the Monitor.
Also, never place drinks or vases with water on top of the monitor. This could
increase the risk of fire or shock hazard or damage to the monitor.
Contents
Please check the following listed accessories before installation:
Monitor
X1
User manual
X1
Power Supply
X1
VGA Cable
X1
Installation
Rear interface
(
1) DC12V
：
Mains power input
(2) VGA
：
Plug the D-type15 pin VGA interface into the VGA video Interface
of the Application, and the other end into the LCD monitor’s VGA
connector. Fasten the screw.
(3) HDMI/DVI :Lets you connect a device, such as a digital cable box, with
an HDMI or a DVI output. HDMI( High Definition Multimedia Interface)
3
4
Summary of Contents for DS104PCT
Page 1: ......
