5
3) To adjust the humidity upward, depress the
↑
key until your desired level of humidity is reached.
4) To adjust the humidity downward, depress the
↓
key until your desired level of humidity is reached.
5) If you go past your desired level of humidity, you may reverse direction by depressing the opposite
key.
6) Once the desired level has been reached, depress the = key on the far right to exit the set-point menu.
The actual humidity will now be displayed.
Maintenance of Reservoir and Wick
1. When the red LED indicator light is on, it is time to fill the water Reservoir. Frequency of filling will vary
depending on climatic conditions and the size of your cabinet. As the Reservoir and Wicking Filter are
constantly exposed to moisture and dirt collected from the circulating air, they must be cleaned
periodically. We recommend that you clean the Reservoir and wick each time you add distilled water.
2. Unplug your system from its power outlet before you begin cleaning the Reservoir and wick.
3. Simply remove the humidification system from your cabinet, being careful not to spill any water on your
humidor. Inserting your hand into grommet hole, remove the wicking filter.
4. Wipe the walls of the Reservoir with a damp paper towel.
5. Wicks should be changed every 90-120 days and can be ordered directly from Vigilant, online at
http://shop.vigilantinc.com/ or by using the enclosed Order Form.
6. Insert a clean wick into the Reservoir and return the Reservoir to your cabinet.
7.
To fill the Reservoir
, replace the Wicking Filter and add
DISTILLED
water through grommet opening.
Never over-fill your Reservoir.
Watch the water level carefully while filling.
Slowly fill your Reservoir to
approximately 1" below the overflow hole.
IMPORTANT:
DO NOT POUR WATER ON THE FAN.
DO NOT OVERFILL THE RESERVOIR, AS OVERFILLING WILL CAUSE DAMAGE TO YOUR
CABINET!
DO
NOT
POUR
WATER
ON
THE
FAN
THIS
CAN
CAUSE
DAMAGE
TO
THE
ELECTRONICS.
DO
NOT
MOVE
CABINET
WITH
WATER
IN
IT.
