4
Steps to Assembly
1.
Locate
your
two
side
panels
and
your
top
panel
(
See
Parts
List
).
Notice
that
the
side
panels
come
with slats
or beadboard edges depending on which type you purchased
. Make sure these face inward
when putting your assembly together.
2.
Apply
some
wood
glue
sparingly
to
the
top
of
the
side
panel
that
your
top
panel
will
be
resting
on.
3.
Using
your
9/64"
drill
bit
pre-drill
your
pilot
holes
into
the
side
of
your
archtop.
Use
the
2
1/2"
wood
screws provided to secure the side panel to the top (
Figure 1
).
Note: Your assembly instructions are the same for a beadboard arch, slatted arch, and arches
with pre-installed lighting. If you have an arch with pre-installed lighting, please reference
page 10.
Figure 1
4. Take
your
top
panel
and
insert
(3)
screws
into
the
pre-drilled
holes.
Secure
the
top
to
the
side
panels
by
sinking
each
screw
completely
into
the
top
panel.
Carefully
tighten,
to avoid
strip
ping
the
holes (
Figure 2
).
Figure 2
