TSFC 24-2/4 User Manual
Vighnaharta Technologies Pvt. Ltd. Page
19
of
26
3. System Programming
The fire panel system is completely programmable at site with the help of panel keypad and LCD. It does not
require software skills OR any special software for Programming.
When panel is in normal state, the screen displays as below. Normal state means all zone of panel are in Enable
and panel is in fault free condiation.
TrueSafe
SYSTEM OK
To enter the programming mode, panel must be in normal condition as above. If any fault or alarm condition
exists, make sure that it is cleared and panel returns to normal condition. Users having Key lock passwords.
Without key lock password user cannot enter in MENU function. Factory default panel do not have any password if
user will enable “Auto Key Lock” function only that time panel will ask passw
ord. (Factory default password is
“1111”)
To enter into Programming mode do following steps,
1.
Press
MENU
key
, it will ask for password (If “Auto Key Lock” function is enable system will ask password)
2.
Enter FOUR digit numeric password.
3.
After entering the password user can access all MENU functions
4.
If password is correct, the LCD displays will show below screen,
Password Invalid
****
3.1 Menu Options
There are total 9 programming menu options as listed below.
❖
Use
and
keys to show the next menu options.
❖
Press
ENTER
key to entering sub menu OR
“enable/disable” function
❖
Press
key to return to previous menu OR Exit menu
ZONE1 Configuration
ZONE2 Configuration
ZONE3 Configuration
ZONE4 Configuration
NAC Mode
NAC Auto Silence
Auto Key Lock
Password Configuration
WiFi Configuration
