Vighnaharta GDS-24-2 User And Installation Manual Download Page 16

Page: 16 / 30

Gas Detection System GDS-24-2/4 User and Installation Manual

Page

Panel Wiring

Following figure shows the internal wiring of GDS-24-2.

Figure 7: Internal Wiring of GDS-24-2

Above figure shows the internal wiring diagram of the panel. The AC Mains connections from external supply are

given to power supply. The power supply generates the 24V DC and battery charging voltages that are given to

connector J2 and J7 of CPU PCB respectively. Mains Fail (MF) connections i.e. C and E connections from the

SSM241.2BC are also given to J2.3 (MF) and J2.4 (G) of CPU PCB respectively which is used for detection of AC

fail.

Below figure shows the internal wiring diagram of the panel GDS-24-4. The AC Mains connections from external

supply are given to PCB RASS_1052. Out of two output connections from PCB RASS_1052, one AC mains

connection is given to Power Supply and another mains connection given to PCB RASS_9060. The power supply

generates the 24V DC and battery charging voltages that are given to connector J2 and J7 of CPU PCB

respectively. Two Mains Fail (Mains DI) connections from the PCB RASS_9060 are given to J2 (MF and G) of CPU

PCB which is used for detection of AC fail.

Summary of Contents for GDS-24-2































Search results

Summary of Contents for GDS-24-2

Reviews:

Related manuals for GDS-24-2

Brands by name

Popular brands

Vighnaharta GDS-24-2, User And Installation Manual

Search results

Summary of Contents for GDS-24-2

Reviews:

Related manuals for GDS-24-2

Brands by name

Popular brands