manualshive.com logo in svg

Vigatec MGVC 1280, Operation Manual

Share
Download
Vigatec MGVC 1280 Operation Manual Download Page 21

- 21 -

MGVC 1280 or GMGVC 1280 for the download procedure. Keep SELECT button pressed and
select SYSTEM GROUP with the up/down buttons. Step through the menu unitil you reach SW
DOWNLOAD.

SW Download
Select

Push SELECT then keep the UP or DOWN button pressed for 3 seconds. The unit will display
ERASING CHIP and then SOFTWAREDOWNLOAD-READY.

SoftwareDownload
Ready                   

≡

9.

Now the unit is ready and you can download the data. In the TRANSFER menu please
select SEND_TEXT_FILE. Now you must browse and search the folder you copied the TXT file
after you downloaded IT from our website. After opening/confirming the selected file; the transfer
procedure starts immediately. The transfer is finished after apporximately 90 seconds. The unit
restarts itself and displays the new firmware version.

10.

Now you must clear the EEPROM. Switch the unit off. While switching mains on keep the STORE
button pressed unitl the unit display EE FACTORY SET.

11.

That is it. Your unit has now new firmware and hopefully the problems you had are solved with the
new version. As there are many projectors and displays coming out new every week, we cannot
guarantee a 100% compatibility with all of them.

Summary of Contents for MGVC 1280






















Reviews:

No comments

Brands by name

Popular brands

Load more brands