str
24
Wide nozzle (9) – removing paint or varnish:
• Connect the nozzle (9) to the hot air outlet.
• The shape of this nozzle is designed to target the hot air. Use it together with a spatula to remove paint.
Flat nozzle (10) – separates glued joints, softens paints:
• Connect the nozzle (10) to the hot air outlet.
• Do not expose the workpiece to the heat for too long, because the burnt color is very difficult to remove. Many adhe
-
sives can be softened by heat. The glued joints can be separated and the excess adhesive removed.
Concentration reduction nozzle (11) – plastic welding:
• Connect the nozzle (11) to the hot air outlet.
• Use this nozzle for heat shrinking tubes and films.
Weed burning nozzle (1)
For plant use, aim the nozzle at the plant and expose it to heat for 5 to 10 seconds depending on the plant species. In the
case of larger plants, treat the upper part of the plant briefly and then aim the nozzle at the dried plant for 5 to 10 seconds.
Ignition nozzle for grill or fireplace (12)
For use as an electric fireplace lighter, safe and fast charcoal, wooden briquettes or wood in garden grills lighter, all safely
and quickly within 2 minutes.
BEFORE THE FIRST USE
Remove any packaging materials from the device and dispose of them in order to prevent them from getting into the
hands of children (risk of suffocation). Do not remove labels attached from the product.
Turning the device on:
Make a loop on the power cord and push it through the clamp on the handle to fasten it.
Connect the unit to an electrical socket with a voltage appropriate to the device.
Switch the device on by switching the main switch (2) to “I” or “II”. The instrument the teaches full operating tempera
-
ture reaches within one.
Turning the device off:
Allow the appliance to cool completely before turning it off. Set the temperature to level I for at least 1 minute. Then it
is possible to turn off the device safely.
Turn switch (2) to position “O”.
After use, unplug the appliance from the electrical socket.
Place the instrument on a stand on a flat, non-flammable surface and allow it to cool completely.
Temperature setting:
You can set the temperature with the temperature switch (2) between positions I and II.
Depending on your application, you can select the most suitable temperature of the air coming out of the nozzle:
Level I: about 80 °C
Level II: about 650 °C
Rotating the working head
The working head is rotatable. Press the button (7) to rotate it.
9.
10.
11.
12.
1.
Use different nozzles
for different uses (9), (10), (11), (1), (12)