str
12
ASSEMBLY
1. Before assembling or disassembling the appliance, make sure it is turned off and disconnected from
the wall outlet.
2. Unscrew the mounting nut from the engine cover.
3. Position the back protective grille firmly to the engine cover and then screw on the fixing nut by
turning it clockwise. Screw it firmly.
4. Push the fan onto the motor shaft and fasten it.
5. Attach the front grille to the back. The right placement is marked on the grids, connect them with
the clamp.
OPERATION
Once the fan has been assembled and connected to the socket, select the rotational speed using the buttons.
Control button functions:
0 – Fan off
1 – low air flow rate setting
2 – Setting the mean velocity of air flow
3 – High air flow rate setting
CONTROL OF HORIZONTAL OSCILATION (ROTATION TO SIDES)
1. For rotation of the fan to the sides at an angle of approx. 90°, push the switch on the motor unit down.
2. Pull it back upwards to end the rotation.
VERTICAL TILT ADJUSTMENT (TILT OF THE ENGINE UNIT)
Before setting the vertical angle of inclination of the motor unit, switch off the fan first. Set the required
angle of the engine unit and then you can start the fan again.
CLEANING AND MAINTENANCE
Before cleaning, make sure the appliance is turned off and disconnected from the power outlet.
Remove the dust regularly with a clean, dry cloth. In case of greater dirt, disassemble the appliance and
wipe the parts with a damp cloth soaked in a warm water solution and a conventional detergent. Then
dry thoroughly. Ensure that water does not get into the motor unit or control panel when cleaning. Do not
immerse the appliance or its power cord in water or rinse it under running water.
Do not use steel wool, abrasive cleaners, gasoline and other aggressive thinners to clean.
STORAGING
If you do not use the fan for a long time, keep it in a clean, dry place, or remove it and put it back in the box.
Summary of Contents for VSTL30
Page 24: ......
