Vigan Mammoth THV1 turbo, User Manual, Page: 8 / 20

8
7
6
5
4
2
1
3
Electric convector with fan THV1 turbo
AC 230V 50/60Hz | 1800W | Class I.
IMPORTANT: Read these instructions fully before using the heater.
Retain these instructions for future reference. This product is for home use only.
TECHINICAL CHARACTERISTICS
• Thermostat for automatic temperature regulation
• Fan for air circulation
• Very quiet operation
• Can be attached to the wall or can just stand
• Handles for manipulation
• Dimensions 560 (W) x 390 (H) x 200 (D) mm
• Weight: 3 kg (incl. package), 2.5 kg (without packaging)
DIAGRAM
1. Fan switch
2. Fan
3. Feet
4. Thermostat
5. Indicator
6. Power adjustment - 1200/1800 W
7. Handles
8. Hot air output
WARNING
• Children of less than 3 years should be kept away unless continuously supervised.
• Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided
that it has been placed or installed in its intended normal operating position and they have been
given supervision or instruction concerning use of the appliance in a safe way and understand the
hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate and
clean the appliance or perform user maintenance.
• CAUTION- Some parts of this product can become very hot and cause burns. Particular attention
has to be given where children and vulnerable people are present.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge if they have been given supervision
or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children without supervision.
ASSEMBLY OF THE HEATER
Before using the heater, the feet (supplied separately in the
carton), must be fitte to the unit. These are to be attached to
the base of the heater using the 4 self-tapping screws provided,
taking care to ensure that they are located correctly in
the bottom ends of the heater side moldings.
str
8