VZ-CMK04
Page 18
Visit the ViewZ website at http://www.viewzusa.com
Installation Instructions
1) Use four M10 hex head bolts, eight M10 flat washers, and four M10 nuts to attach the mounting plate to the ceiling
adapter.
At this time, finger tighten all hardware.
Attaching the Mounting Plate
Step 1
Step 2
1) Once the two units have been attached together, use a 17mm socket wrench and a 17mm wrench to tighten the
M10 hardware.
A 17mm open-end wrench and a 17mm socket wrench will be required to perform the following step
(not included).
*Mount shown for illustration purposes only (not included)
*Mount shown for illustration purposes only (not included)
