5
User Manual
Visit the ViewZ USA website at https://www.viewzusa.com
Important Safety Instruction
Caution
Available Temperature & Humidity
Dot Defect (dead pixel) of TFT
SAFETY INSTRUCTION
• If the connector between the plug and the pin is dusty or dirty, clean it properly using a dry cloth.
•
Make sure to unplug the power cord before cleaning the monitor.
•
Make sure to leave a gap between monitor and wall.
•
Do not drop the monitor when moving it.
• Place your monitor in a location with low humidity and a minimum of dust.
•
Install the monitor base on a showcase or shelf so that the end of the base does not protrude from the
showcase or shelf.
•
Do not place the monitor on an unstable or small surface area.
•
Do not install inside a vehicle.
• Disconnect the plug from the outlet during storms or lightning or if it has not been used for a long time.
• Do not try to move the monitor by pulling on the power cord.
•
Do not cover the vents on the monitor.
• When moving the monitor, turn off and unplug the power cord. Make sure that all cables, including HDMI
cable and cables connected to other devices, are disconnected before moving it.
• Place the monitor out of children’s reach, as they could damage it by hanging onto it.
• Operating Temperature : 32°F
~
95°F / 0°C
~
35°C
• Operating Humidity : 10 ~ 90% RH
• Storage Temperature : 14°F
~
122°F / -10°C
~
50°C
• Storage Humidity : 10 ~ 90% RH
ViewZ monitors are manufactured using high-end semiconductor technology with precision ratings of 99.9%
and above. However, it may be the case that certain RGB and white pixels seem darker (or entirely unlit i.e.
black).
Modern production methods cannot guarantee an absolute fault-free monitor. To this effect, no LED
manufacturer can guarantee a defect free panel. A few isolated pixel or sub-pixel faults are considered
tolerable and different policies exist that govern the amount of these tolerable values.
While most pixel faults occur in isolated regions, a cluster of dead pixels or sub-pixels can sometimes form for
which a separate ruling applies. A cluster is defined as an area of 5x5 pixels. ViewZ’s policy on pixel failure:
either as an isolated fault or in the form of a cluster is outlined on the website: www.viewzusa.com
