57
User Manual
Visit the ViewZ USA website at https://www.viewzusa.com
6. Object Left
CONFIG. /INTELLIGENT ANALYSIS
Settings
Alarm Interval
Minimum
(Maximum) Size(cm²)
Shortest
Dwelling Time (Sec)
Output Channel
SMTP
Upload Target Info
(1-1800s)
Enter a value in the area box.
Enter a value in the area box.
Enter a value in the area box.
Click to enable Upload Target Info.
Click the parameter and input an ID.
[Default Value]
5s
[How to set]
[How to set]
[How to set]
[How to set]
[How to set]
[Default Value]
OFF
[Default Value]
OFF
[Default Value]
10
object within the deployment area meets the set
is connected to an external alarm indicator, the alarm
shortest dwelling time, it is generated again in next
intervals (alarm interval) until the end of event.
indicator signals when an alarm is triggered.
Setting range: 1-1,800 seconds.
An alarm is generated when the dwelling time of an
The target size for triggering an effective alarm is set
An alarm is generated when the object left time is
is 0-1000000 square centimeters. When setting the
may be generated.
based on the actual target size. The default value is
longer than the shortest dwelling time.
target size, you need to accurately set ”Real size in
1000-100000 square centimeters and the setting range
Setting range: 5-60 seconds.
scene” in advanced parameters, otherwise no alarms
If you check to set the Output Channel and the device
If you turn on, system will send a notice email.
Enable the function of uploading target information by
You can set the email on
Network Service / SMTP
.
clicking below the Live video in a flash browser
to turn into . When an alarm is triggered, the
target movement trace can be displayed (The trace
can be seen only within the deployment area and
disappears after the target leaves the deployment
area)
Setting
Parameter
DESCRIPTION
Table 6-6 Object Left Parameter Description
