manualshive.com logo in svg

Viewtech VJ-3, Operating Manual, Page: 23 / 28

Share
Download
Viewtech VJ-3 Operating Manual Download Page 23

21

8.5 IMAGE PLAYBACK

There are two screen views that display recorded images: a full screen view  

of a single image, and a multi-image view of thumbnails.

8.5.1 MULTI-IMAGE VIEW (THUMBNAILS)

When a real-time image is displayed, press Live Camera/Video/Image Preview 

toggle  . Press the Freeze/Back button  , and the multi-image view (see 

Fig. 8-6) will be displayed. Press the Zoom/Playback button   to enlarge the 

image selected.

REMINDER

• Nine thumbnails maximum can be displayed on the screen.
• A video indicator icon 

 appears on the lower left of each thumbnail that 

is a video.

 

Fig. 8-6 Multi-image (thumbnail) view (with video indicator icons)

8.5.2 FULL SCREEN VIEW

1.  While in multi-image view, select the pictures or videos to watch by using 

the Brightness Control/Up button   and Image Rotation/Down button 

,  

and then, when the desired image/video is selected, press the Zoom/

Playback button   to enter full-screen view for that image or video.

2.  To return the multi-image view from the state of full-screen image view or 

video, use the Freeze/Back button.

Summary of Contents for VJ-3





























Reviews:

No comments