manualshive.com logo in svg

Viewtech MHDV04P, User Manual

Share
Download
Viewtech MHDV04P User Manual Download Page 12

 
 

 

11 

2-3. Connection Devices 

The front & rear panel of the 4 channel premium DVR comprises the following: 
 

 

 
• 

Front USB

: Two USB ports are provided to connect external devices like HDD, ODD, Flash 

memory for Backup, System upgrade or USB mouse on the front panel. A USB mouse can be 
connected only front panel USB port dedicated only for mouse.

   

 

 

 

Note

: To connect the cables/connectors, makes sure they are all through the Rear Cover Hole 

first before connecting them and lock the Rear Cover for easy arrangement. 

 
Video/Audio Input, Camera Power Output 
 

 

The unit has group of 4ch Video Input(VI), Audio Input(AI), Camera Power Output(PO) as shown 
above. Use 24pin connector included in a box to connect cameras.   

Monitor Output 

 

The connector for CVBS(NTSC or PAL) monitor. VO refers to Video Out, AO refers to Audio Out, 
and The Monitor power (12V) needs to be connect to PO. G(Ground) Pin is general for all outputs. 
12V Monitor power is only supportable for max. 7” LCD monitor (TX/RX is not in any usage on 
this unit) 

 

Notice

: The total 12V/1.6A is supportable for 4 cameras and 1 monitor. 

Summary of Contents for MHDV04P











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands