6
Using the LCD Display
Setting the Timing Mode
Setting the timing mode is important for maximizing the quality of the screen image
and minimizing eye strain. The
timing mode
consists of the
resolution
(example
1024 x 768) and
refresh rate
(or vertical frequency; example 60 Hz). After setting
the timing mode, use the OSD (On-screen Display) controls to adjust the screen
image.
For optimal picture quality, please use the recommended timing mode specific to
your LCD display listed on the “Specification” page.
To set the Timing Mode:
•
Setting the resolution:
Access "Appearance and Personalization" from Control
Panel via the Start Menu, and set the resolution.
•
Setting the refresh rate:
See your graphic card’s user guide for instructions.
IMPORTANT:
Please make sure that your graphics card is set to 60Hz vertical
refresh rate as the recommended setting for most LCD displays. Choosing a non-
supported timing mode setting may result in no image being displayed, and a
message showing “Out of Range” will appear on screen.
OSD and Power Lock Settings
•
OSD Lock:
Press and hold the Left button for 5 seconds, Pop up OSD Tip press
and hold the left button for 10 seconds. If any buttons are pressed the message
OSD Locked
will display for 3 seconds.
•
OSD Unlock:
Press and hold the Left button for 5 seconds, Pop up OSD Tip
press and hold the left button for 10 seconds.
•
Power Button Lock:
Press and hold the Left button for 5 seconds, Pop up OSD
Tip press and hold the left button for 10 seconds. If the power button is pressed
the message
Power Button Locked
will display for 3 seconds.
•
Power Button Unlock:
Press and hold the Left button for 5 seconds, Pop up
OSD Tip press and hold the left button for 10 seconds..
Summary of Contents for XG3202-C
Page 25: ......
