![background image](http://html1.mh-extra.com/html/viewsonic/vx710-17-lcd-monitor/vx710-17-lcd-monitor_service-manual_1020018013.webp)
Do the following to adjust the screen image:
1.
To display the Main Menu, press button [1].
NOTE:
All OnView menus and adjustment screens disappear automatically after about 30
seconds. This is adjustable through the OSD timeout setting in the setup menu.
2.
To select a control you want to adjust, press
S
or
T
to scroll up or down the Main Menu.
3.
After the control is selected, press button [2]. A control screen like the one shown below
appears.
4.
To adjust the control, press the up
S
or down
T
buttons.
5.
To save the adjustments and exit the menu, press button [1]
twice
.
The following tips may help you optimize your display:
• Adjust your computer's graphic card so that it outputs a video signal 1280 x 1024 @ 60Hz
to the LCD display. (Look for instructions on “changing the refresh rate” in your graphic
card's user guide.)
• If necessary, make small adjustments using H. POSITION and V. POSITION until the
screen image is completely visible. (The black border around the edge of the screen should
barely touch the illuminated “active area” of the LCD display.)
The line at the bottom of the screen shows the
current functions of buttons 1 and 2:
Exit or select
the
Brightness control.
10
ViewSonic
Corporation
Co
nfidential
-
Do
Not
Copy
VX710
Summary of Contents for VX710 - 17" LCD Monitor
Page 51: ...2 Monitor can not power on 48 ViewSonic Corporation Confidential Do Not Copy VX710 ...
Page 52: ...3 Monitor white screen 49 ViewSonic Corporation Confidential Do Not Copy VX710 ...
Page 53: ...4 Monitor black screen 50 ViewSonic Corporation Confidential Do Not Copy VX710 ...
Page 54: ...5 Analog input always shows NO SIGNAL 51 ViewSonic Corporation Confidential Do Not Copy VX710 ...