![background image](http://html1.mh-extra.com/html/viewsonic/vx2413wm-2/vx2413wm-2_service-manual_1019889026.webp)
26
Click “Auto”,then the update will begin.Wait for a moment until the bar is 100%,the program windows will show
“Programing Success”.This means the update is successful.
5.3 DDC Key in Procedure
Note:
1. Every time after replacing the main board, you have to do the DDC key in.
2. If you find the DDC does not conform to the LCD TV, you have to do the DDC key in.
5.3.1 Equipment Needed
-
VX2413wm-2
-
PC (Personal computer)
-
LPT
cable
-
12V
DC
-
Firmware upgrade program
-
DDC
Card
5.3.2 Install software
You must install the
at the first.
Note:
After installation, you must restart the PC to take the setup to effect.
Summary of Contents for VX2413wm-2
