background image

ViewSonic

VX2235wm

2

Important Safety Instructions

1.

Read these instructions completely before using the equipment.

2.

Keep these instructions in a safe place.

3.

Heed all warnings.

4.

Follow all instructions.

5.

Do not use this equipment near water. Warning: To reduce the risk of fire or electric shock, 

do not expose this apparatus to rain or moisture.

6.

Clean with a soft, dry cloth. If further cleaning is required, see “Cleaning the Display” in 

this guide for further instructions.

7.

Do not block any ventilation openings. Install the equipment in accordance with the 

manufacturer’s instructions.

8.

Do not install near any heat sources such as radiators, heat registers, stoves, or other 

devices (including amplifiers) that produce heat.

9.

Do not attempt to circumvent the safety provisions of the polarized or grounding-type 

plug. A polarized plug has two blades with one wider than the other. A grounding type 
plug has two blades and a third grounding prong. The wide blade and the third prong are 
provided for your safety. If the plug does not fit into your outlet, consult an electrician for 
replacement of the outlet.

10.

Protect the power cord from being tread upon or pinched, particularly at the plug, and the 

point where if emerges from the equipment. Be sure that the power outlet is located near 
the equipment so that it is easily accessible.

11.

Only use attachments/accessories specified by the manufacturer.

12.

Use only with the cart, stand, tripod, bracket, or table specified by the 

manufacturer, or sold with the equipment. When a cart is used, use caution 
when moving the cart/equipment combination to avoid injury from tipping 
over. 

13.

Unplug this equipment when it will be unused for long periods of time.

14.

Refer all servicing to qualified service personnel. Service is required when the unit has 

been damaged in any way, such as: if the power-supply cord or plug is damaged, if liquid 
is spilled onto or objects fall into the unit, if the unit is exposed to rain or moisture, or if 
the unit does not operate normally or has been dropped.

Summary of Contents for VX2235WM - 22" LCD Monitor























Reviews: