![background image](http://html1.mh-extra.com/html/viewsonic/vta700/vta700_user-manual_1021482018.webp)
Adjusting the “Clock/Phase” Submenu
To adjust the “Clock/Phase” submenu you should follow the steps below:
1. Bring-up the OSD “
Main Menu
”.
2. Use ‘
Up (
Ϧ
)
’ (or ‘
Down (
ϯ
)
’) to move forward (or backward) to the clock/phase icon and
highlight it.
3. If ‘Clock’ is selected, you may use ‘
Up (
Ϧ
)
’ or ‘
Down (
ϯ
)
’ buttons to adjust the setting of clock.
The fullness of the graphic bar as well as the numerical value at the right corner is also changed
accordingly.
Note:
We recommend you perform the Auto Setup first. And adjust the clock setting only if the
image looks incorrect.
If ‘Phase’ is selected, you may use ‘
Up (
Ϧ
)
’ or ‘
Down (
ϯ
)
’ buttons to adjust the setting of phase.
The fullness of the graphic bar as well as the numerical value at the right corner is also changed
accordingly.
Note:
We recommend you perform the Auto Adjust before adjusting the phase.
16
Summary of Contents for VTA700
Page 1: ...9LHZ6RQLF LCD Monitor 8VHU XLGH VTA700 VTA900 ...
Page 32: ...9LHZ6RQLF ...