ViewSonic VS11435, Service Manual, Page: 9 / 70

Main Menu Controls
Auto Image Adjust*
1
Contrast/Brightness*
2
*
4
Input Select
Analog, Digital
Audio Adjust
Volume*
4
, Mute*
4
Color Adjust
SRGB, 9300K,7500K, 6500K(default), 5400,User Color [R, G, B]
Information [H Frequency, V Frequency, Resolution, Pixel Clock, Serial Number, Model
Number, [“www.ViewSonic.com” ]
Manual Image Adjust
Horizontal Size*
1
, H/V. Position*
1
, Fine Tune*
1
, Sharpness*
3 ,
Setup Menu
Language [English, French, German, Italian, Spanish, Finnish, Japanese , Simplified
Chinese, Traditional Chinese], Resolution Notice, OSD Position, OSD Timeout, OSD
Background
MEMORY RECALL
*
1
These functions are not available in Digital Mode
*
2
These functions are not available under SRGB Mode.
*
3
These functions are not available under Native Resolution Mode
*
4
These functions setting can be recalled to default value by pressing [ ▼ ]+[ ▲ ]
[Remark] Please refer to the detail in the Appendix C
Function descriptions
OSD Lock short cuts function for the buttons
The OSD lock will be activated by pressing the front panel control buttons "(1), & ( ▲ )" for 10
seconds. If the user then tries to access the OSD by pressing any of the buttons "1", " ▼ ", " ▲ ",
"2" a message will appear on the screen for 3 seconds showing "OSD Locked". The OSD lock
will be deactivated by pressing the front panel control buttons "(1), & (
▲ )" again for 10
seconds.
Note1: When the OSD is locked will lock all functions, including “Volume” and “Mute”
Note 2: Status bar indicating OSD Lock or Unlock is in progress and when complete it will
indicate “OSD Locked”
Note 3: OSD Lock should not lock Power Button and Power Lock function
Power Lock short cuts function for the buttons
The power button lock will be activated by pressing the front panel control buttons "(1), & ( ▼ )"
for 10 seconds. Locking the power button means that the user won't be able to turn off the
LCD while the power button is locked. If the user presses the power button while it is locked, a
message will appear on the screen for 3 seconds showing "Power Button Locked". It also
means that with the power button locked, the LCD would automatically turn back "On" when
power is restored after a power failure. If the power button is not in the locked mode, then
power should return to it's previous state when power is restored after a power failure. The
power button lock will be deactivated by pressing the front panel control buttons "(1), & (
▼ )"
again for 10 seconds.
Note 1: Status bar indicating Power Button lock or unlock is in progress and when complete it
will indicate “Power Button Locked”
Note 2: Power should only be lockable in the “On State”
Memory Recall Actions
Memory Recall action on the analog and digital mode as below
1. Set the factory defaults as shown in Section 4-8
2. Clean all the mode setting buffer
ViewSonic Corporation
Confidential - Do Not Copy
VX2035wm-1
6