![background image](http://html1.mh-extra.com/html/viewsonic/viewpanel-vp180m/viewpanel-vp180m_user-manual_1021300010.webp)
ViewSonic
VP180m
9
Do the following to adjust the screen image:
1
To display the Main Menu, press the
NAVI
button on the Front Control
Panel shown on the previous page.
NOTE:
All OnView menus and adjustment screens disappear automatically
after about 15 seconds. You can adjust the length of time on the OSD Time Out
function in the Setup Menu.
2
Rotate the
NAVI
button to highlight a control you want to adjust. Press the
NAVI
button.
3
To adjust the selected control, rotate the
NAVI
button .
4
To save the adjustments and exit the menu, select Exit and press the
NAVI
button.
The following tips may help you optimize your display:
• Adjust your computer's graphic card so that it outputs a video signal 1280 x
1024 @ 60Hz to the VP180m. (Look for instructions on "changing the
refresh rate" in your graphic card's user guide.)
• If necessary, make small adjustments using H POSITION and V POSITION
until the screen image is completely visible. (The black border around the
edge of the screen should barely touch the illuminated "active area" of the
ViewPanel
®
.)
• Adjust Fine Tune so that the screen image looks focused, crisp, and sharp.
The command line at the bottom of
can do from this screen: i.e, toggle between
the control screen shows what you
the Brightness and Contrast control screens,
adjust, or exit.
Summary of Contents for ViewPanel VP180m
Page 23: ...22 ViewSonic VP180m NOTES...
Page 24: ...ViewSonic Corporation...