![background image](http://html.mh-extra.com/html/viewsonic/vg170mvlcds23724-3w/vg170mvlcds23724-3w_service-manual_1021066007.webp)
3. Front Panel Function Control Description
Location of Controls
MUNT [1]MENU ADJUST
▲ LED POWER
;
-VOL
-
[2]ENTER
;
+ VOL+ ADJUST
▼
1) POWER
:
Press the power
button to turn the monitor on. Press
it again to turn the monitor off.
2) [1]MENU
:
Enter or exit the OSD adjustment menu.it also exit from the submenu back to previous menu.
3) [2]ENTER
:
To confirm the current selection
4) ADJUST
▲
(UP)
To scroll up in menu or to increase value of selected item.
5) ADJUST
▼
:(DOWN)
To scroll down in menu or to decrease value of selected item.
6)
MUNT: Temporarily silences audio output.
7)
;
-VOL -: Decreases or increase volume.
8)
;
+ VOL+: Decreases or increase volume.
9)
POWER INDICATOR :
The LED will light with green color in normal on state,and will light with orange color in power saving mode.
10)
Brightness/Contrast: press button UP/DOWN .
11)
Auto Image Adjust : press button [2] .
12)
OSD lock and unlock: press two buttons [1]&[up] simultaneously for 10 seconds.
13)
Power lock and unlock: press two buttons [1]&[Down] simultaneously for 10 seconds.
14)
ALL RESET: First, power off the monitor, un-plug the AC cord, then press “
▲
” and “Power “ key at the same
time and plug the AC cord.
15)
Factory Mode:First, power off the monitor, un-plug the AC cord and be sure the signal cable is connected(D-sub
connected) , then press “2” and “Power “ key at the same time and plug the AC cord.
16)
RUN-IN mode: First, power off the monitor, un-plug the AC cord and be sure the signal cable is
not
connected (D-sub
not
connected) , then press “2” and “Power “ key at the same time and plug the AC cord.
17)
ISP mode:First, power off the monitor, unplug the AC cord, then press “2” and “Power “ and “down” key at the same
time and plug the AC cord.
18)
AUTO color: then press “1” and “
▲
“ and “
▼
” key at the same time
.
4
ViewSonic
Corporation
Co
nfidential
-
Do
Not
Copy
VG170m