8
1.
Insert the SD/MMC/MS card into the 3-in-1 card slot with the metallic
contacts facing towards the display.
2.
Push a USB memory stick into the USB HOST slot.
Note:
y
Do not use any force while inserting a memory card or attaching a memory stick.
y
The 3-in-1 card slot only reads one memory card at a time. Do not insert more than one card into one memory card slot.
y
To remove the cards or the USB memory stick, pull it out gently.
Copy files from computer
You can connect the digital photo frame to a computer copy files to the memory device connected to the digital photo frame or to the built-in
memory (depends on the unit you purchase).
1.
Make sure that your computer has been started before you start.
2.
Connect the mini plug of the USB cable to the mini USB port on digital photo frame, and push the other end into a free USB port on your
computer.
3.
The computer system detects “New hardware” and starts to install the driver automatically. Wait for the system to finish the installation.
When it has finished, several “Removable Disk”, which indicate all drivers of the digital photo frame, will be created in “My computer”.
ViewSonic
VFM835-52G/VFM835-72G
