![background image](http://html.mh-extra.com/html/viewsonic/ve902m/ve902m_service-manual_1021050016.webp)
Hot Keys for Function Controls
[Power on/off]
Main Menu
[Auto/Exit]
Input toggle (Analog or Digital) or Auto Image Adjust.
[+] or [-]
To immediately activate Contrast menu. It should be change to Brightness
OSD by push button [2]
[+] + [-]
Recall both of Contrast and Brightness to default
[Power on/off] + [Auto/Exit]
Toggle 720x400 and 640x400 mode when input 720x400 or 640x400
mode
[Power on/off] + [+] + [-]
White Balance. (Not shown on user’s guide)
[Power on/off] + [-]
Power Lock
[Power on/off] + [+]
OSD Lock
1.Turn off [Power on/off] button
2. [+] + [-] + [Power on/off] at same
time
3. Press [Menu]
All Mode Reset. It will erase all end users’ setting and restore the factory
defaults.
1.Turn off [Power on/off] button
2. [+] + [-] + [Power on/off] at same
time
3. Press [Menu]
Burn in Mode. After entering Burn in Mode, press Power on/off button,
you will find the information about this BIOS
Remark: All the short cuts function are only available while OSD off
Hot Keys for Factory Control
1.
Turn off [Power on/off] button.
2.
Press [+] + [-] + [Power on/off] at same time
3.
Press [Menu]
Then you will see the BIOS update picture show in the screen as below.
13
ViewSonic
Corporation
Co
nfidential
-
Do
Not
Copy
VE902m