![background image](http://html1.mh-extra.com/html/viewsonic/va712-2/va712-2_service-manual_1020961012.webp)
ViewSonic Corporation
Confidential - Do Not Copy
VA712-2_ VA712b-2
9
Do the following to adjust the display setting:
1.
To display the Main Menu, press button [1].
NOTE:
All OSD menus and adjustment screens disappear automatically after about 15 seconds.
This is adjustable through the OSD timeout setting in the setup menu.
2.
To select a control to adjust, press or
▼
to
▲
scroll up or down in the Main Menu.
3.
After the desired control is selected, press button [2]. A control screen like the one shown
below appears.
The command line at the bottom of the control screen
tells what to do next from this screen. You can toggle
between control screens, adjust the selected option, or
exit the screen.
4.
To adjust the setting, press the up
▼
or
▲
down T buttons.
5.
To save the adjustments and exit the menu, press button [1] twice.
The following tips may help you optimize your display:
• Adjust the computer's graphics card so that it outputs a 1280 x 1024 @ 60Hz video signal to the
LCD display. (Look for instructions on “changing the refresh rate” in the graphics card's user
guide.)
• If necessary, make small adjustments using H. POSITION and V. POSITION until the screen
image is completely visible. (The black border around the edge of the screen should barely
touch the illuminated “active area” of the LCD display.)
Summary of Contents for VA712-2
