![background image](http://html1.mh-extra.com/html/viewsonic/va1916w-19-lcd-monitor/va1916w-19-lcd-monitor_service-manual_1020698009.webp)
8
Do the following to adjust the display setting:
1.
To display the Main Menu, press button [1].
NOTE:
All OSD menus and adjustment screens disappear automatically after about 15
seconds. This is adjustable through the OSD timeout setting in the setup menu.
2.
To select a control to adjust, press
or
to scroll up or down in the Main Menu.
3.
After the desired control is selected, press button [2]. A control screen like the one shown
below appears.
The line at the bottom of the screen shows
the current functions of buttons 1 and 2:
Exit or select the Brightness control.
4.
To adjust the control, press the up
or down
buttons.
5.
To save the adjustments and exit the menu, press button [1]
twice
.
The following tips may help you optimize your display:
•
Adjust the computer's graphics card so that it outputs a 1440 x 900 @ 60Hz video signal to
the LCD display. (Look for instructions on
“
changing the refresh rate
”
in the graphics card's
user guide.)
•
If necessary, make small adjustments using H. POSITION and V. POSITION until the
screen image is completely visible. (The black border around the edge of the screen should
barely touch the illuminated
“
active area
”
of the LCD display.)
Summary of Contents for VA1916W - 19" LCD Monitor
