ViewSonic PRO9500 User Manual Download Page 238

Page: 238 / 289

Installation

233

ViewSonic

Pro9500

After pressing the ► button, a dialog to

confirm whether or not to save the setting is

displayed.

Press the ► button to complete the setting.

Use the ▲/▼ buttons to highlight STACK

MODE, and press the ► button to display the

STACK MODE dialog.

Highlight MAIN with the ▲/▼ buttons, and

press the ◄ button to return to the previous menu.

Use the ▲/▼ buttons to highlight LAMP

MODE, and press the ► button to display

the LAMP MODE dialog.

Highlight DUAL with the ▲/▼ buttons, and press the ► button.

2.3 Installing the second projector (Set B) - Setting up Set B (continued)

Summary of Contents for PRO9500


































































































































































































































































































Search results

Summary of Contents for PRO9500

Reviews:

Brands by name

Popular brands

ViewSonic PRO9500, User Manual

Search results

Summary of Contents for PRO9500

Reviews:

Brands by name

Popular brands