![background image](http://html.mh-extra.com/html/viewsonic/pjd7830hdl/pjd7830hdl_user-manual_1019349043.webp)
32
Displays the position adjusent page. This function is only available when a PC type
input signal is selected.
Phase
Adjusts the clock phase to reduce image distortion. This function is only available
when a PC type input signal is selected.
H. Size
Adjusts the horizontal width of the image. This function is only available when a PC
type input signal is selected.
Zoom
Using the remote control
1. Press on the remote control to display the Zoom bar.
2. Press / to magnify the picture to a desired size.
3. Press
repeatedly to magnify the picture to a desired size.
4. To navigate the picture, press
Enter
to switch to the paning mode and press the
directional
arrows
( , , , ) to navigate the picture.
5. To reduce size of the picture, press
Enter
to switch back to the zoom in/out
functionality, and press
Auto Sync
to restore the picture to its original size. You
can also press
repeatedly until it is restored to the original size.
Using the OSD menu
1. Press
Menu
and then press until the
DISPLAY
menu is highlighted.
2. Press
to select
Zoom
and press
Enter
. The Zoom bar displays.
3. Repeat steps 3-5 in the section of Using the remote control above.
Summary of Contents for PJD7830HDL
Page 72: ...61 IR control table System Code 83F4 Format NEC ...
Page 79: ......