ViewSonic PJD5123 User Manual Download | Manualshive

Page: 22 / 55

background image

EN-17

17

Connecting Video source devices

You can connect your projector to various Video source devices that provide any one
of the following output sockets:



Component Video



S-Video



Video (composite)

You need only connect the projector to a Video source device using just one of the
above

connecting methods, however each provides a different level of video quality.

The method

you choose will most likely depend upon the availability of matching

terminals on both the

projector and the Video source device as described below:

Best video quality

The best available video connection method is Component Video (not to be confused
with composite Video). Digital TV tuner and DVD players output Component Video
natively, so if available on your devices, this should be your connection method of
choice in preference to (composite) Video.
See

“Connecting a Component Video source device” on page 18

for how to connect

the projector to a component video device.

Better video quality

The S-Video method provides a better quality analog video than standard composite
Video. If you have both composite Video and S-Video output terminals on your Video
source device, you should elect to use the S-Video option.
See

“Connecting an S-Video source device” on page 18

for how to connect the

projector to an S-Video device.

Least video quality

Composite Video is an analog video and will result in a perfectly acceptable, but less
than optimal result from your projector, being the least video quality of the available
methods described here.
See

“Connecting a composite Video source device” on page 19

for how to connect the

projector to a composite Video device.

«
...
20
21
22
23
24
...
»

Summary of Contents for PJD5123
























































Reviews:

No comments

Related manuals for PJD5123

Brand: NEC Pages: 2

Brand: Daewoo Pages: 39

Brand: Panasonic Pages: 131

LED Mini Projector

Brand: Innovative Pages: 21

Brand: LG Pages: 12

Brand: LG Pages: 20

Brand: LG Pages: 66

Brand: LG Pages: 44

Brand: LG Pages: 52

Brand: LG Pages: 52

Brand: LG Pages: 169

Brand: LG Pages: 57

Brand: LG Pages: 33

Brand: LG Pages: 36

Brand: LG Pages: 32

RT-44/48/52SZ50LP

Brand: LG Pages: 47

Brand: LG Pages: 33

Brand: LG Pages: 51

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands